Cargador de baterías Victron Phoenix 12/24V
Sistema de carga variable de 4 etapas: bulk – absorption – float – storage El cargador Phoenix dispone de un sistema de gestión de baterías
Sistema de carga variable de 4 etapas: bulk – absorption – float – storage El cargador Phoenix dispone de un sistema de gestión de baterías
La calidad sin concesión Los cargadores de batería Centaur son unos aparatos simples, robustos y económicos, pero que no dan ninguna concesión a nuestras normas de
These compact pre-filters prevent particles from jamming valves and causing pump breakdowns. Each one features a screw-off, transparent housing for easy inspection and quick, in-place cleaning.
Available in 21 ounce (0.5 liter), 1 quart (1 liter) and 2 gallon (8 liter) sizes, each Jabsco Accumulator Tank holds a reservoir of air and
Each of these fully assembled, easy-to-install water pressure systems uses either single or double PAR-Max 4 pumps, a strainer and a pre-pressurized accumulator tank. That means all
This variable flow, constant water pressure pump features technology to make your on-board water experience the same as you would expect on land. Capable of a
Our latest design, the PAR Plus series is available with three flow rates: from 4, 5 and 6 GPM (15, 19 and 23 LPM). It was
This device protects your boat’s water system by limiting the inlet pressure to 45 psi (3.1 bar). It’s available in two styles. The permanently installed flush mount
The large PAR-Max 4 has a pulsation-free, four chamber diaphragm design, and flow rates of up to 4.5 GPM (17 LPM) for up to five outlets.
The PAR-Max 3.5 pump produces 3.5 GPM (13.2 LPM). It’s suitable for complex installations on larger boats with up to four outlets, and has a heavier-duty motor
The PAR-Max 2.9 is suitable for one to three outlets, offering 2.9 GPM (10.9 LPM). It has the same bypass feature as the PAR-Max 1.9, allowing it
The PAR-Max 1.9 is suitable for smaller boats with one or two outlets, producing 1.9 GPM (7.2 LPM). It’s supplied with a built-in pulsation-dampening bypass to reduce
Our smallest pump, the PAR-Max 1 is designed for smaller day boats. It’s available with or without an elegant faucet.
When water enters the bilge and reaches 2-3/4″ (7cm), a sensor turns on the pump. After the water is pumped out, another sensor shuts off the
Our latest automatic pump design, the LoPro allows for pumping out of tight spaces and shallower bilges. The LP900S model uses a unique double system for sensing
© 2022 All rights reserved - Trimer -